Jazzmaster HYBRID Guitar Pickups SET A5 P90 / Humbucker Hand Wound Fender FAT by Q pickups
Jazzmaster HYBRID Guitar Pickups SET A5 P90 / Humbucker Hand Wound Fender FAT by Q pickups
販売価格: 19,000円(税込)
申し訳ございません、こちらの商品お取り寄せに3週間ほどいただきます。よろしくお願いします。
商品詳細
1つ1つのピックアップを手巻きで製造しているピックアップ専門メーカーで、ヨーロッパだけではなく世界でも広く支持されている Q pickups からJazzmaster HYBRID Guitar Pickups SET A5 P90 / Humbucker Hand Wound Fender FAT by Q pickupsになります。
Jazzmaster pickups SET - matching bridge and neck.
These will fit Jazzmaster guitars and pickup covers - these are NOT P90 or humbucker sized pickups!
Imagine a crossover between Jazzmaster pickup, P90 pickup and humbucker pickup. This is it.
Jazzmaster bobbin with humbucker steel slugs - powered by 2 magnet bars like P90s.
Instead of classic Alnico magnet rods each of these has 6pcs NICKEL PLATED STEEL SLUGS - 1215 alloy - coupled with 2pcs AlNiCo5 BAR MAGNETS.
Fat tone with tight bass and warm high freq. - the tone is classic for this type of design, kind of p90ish - but fuller and clearer due to the steel slugs being used instead of classic screws.
This would be a classic moderate output set - but we can build these any way you want - with more or less output or with different magnet alloys.
Hotter bridge at 8.1 kOhm for some extra bite and balls.
The neck at 7kOhm has all the power you might need - and if you turn down the volume down just a little bit these will sound clear and twangy.
- hand wound with Elektrisola AWG42 enameled copper wire
- vintage specs BLACK flatwork - correct vintage Jazzmaster coil dimensions
- Nickel plated STEEL slugs with Alnico 5 BAR MAGNETS
- wax potted in paraffin and bee`s wax
- BRIDGE magnetic polarity is SOUTH UP,
- NECK is NORTH UP
- R.W.R.P - hum cancelling when both pickups are active
These will fit genuine Fender Jazzmaster and other replacement Jazzmaster pickup covers.
Pole spacing is 51.0mm (2.007 in.) on center.
If you have any questions or need something a little different please let me know and we will work it out
工場出荷状態のカバー無し商品となります。
(新品)
Jazzmaster pickups SET - matching bridge and neck.
These will fit Jazzmaster guitars and pickup covers - these are NOT P90 or humbucker sized pickups!
Imagine a crossover between Jazzmaster pickup, P90 pickup and humbucker pickup. This is it.
Jazzmaster bobbin with humbucker steel slugs - powered by 2 magnet bars like P90s.
Instead of classic Alnico magnet rods each of these has 6pcs NICKEL PLATED STEEL SLUGS - 1215 alloy - coupled with 2pcs AlNiCo5 BAR MAGNETS.
Fat tone with tight bass and warm high freq. - the tone is classic for this type of design, kind of p90ish - but fuller and clearer due to the steel slugs being used instead of classic screws.
This would be a classic moderate output set - but we can build these any way you want - with more or less output or with different magnet alloys.
Hotter bridge at 8.1 kOhm for some extra bite and balls.
The neck at 7kOhm has all the power you might need - and if you turn down the volume down just a little bit these will sound clear and twangy.
- hand wound with Elektrisola AWG42 enameled copper wire
- vintage specs BLACK flatwork - correct vintage Jazzmaster coil dimensions
- Nickel plated STEEL slugs with Alnico 5 BAR MAGNETS
- wax potted in paraffin and bee`s wax
- BRIDGE magnetic polarity is SOUTH UP,
- NECK is NORTH UP
- R.W.R.P - hum cancelling when both pickups are active
These will fit genuine Fender Jazzmaster and other replacement Jazzmaster pickup covers.
Pole spacing is 51.0mm (2.007 in.) on center.
If you have any questions or need something a little different please let me know and we will work it out
工場出荷状態のカバー無し商品となります。
(新品)