Mini Humbucker Pickup Vintage Correct Nickel Deluxe Gibson Hand Wound by Q pickups
Mini Humbucker Pickup Vintage Correct Nickel Deluxe Gibson Hand Wound by Q pickups
販売価格: 16,700円(税込)
申し訳ございません、こちらの商品お取り寄せに3週間ほどいただきます。よろしくお願いします。
商品詳細
1つ1つのピックアップを手巻きで製造しているピックアップ専門メーカーで、ヨーロッパだけではなく世界でも広く支持されている Q pickups からMini Humbucker Pickup Vintage Correct Nickel Deluxe Gibson Hand Wound by Q pickupsになります。
This listing is for 1 pickup - Mini Humbucker.
Pickup cover dimensions are 2.67" x 1.1" x .55" (67.95mm x 28mm x 14mm).
2.94" / 74.6 mm between the centers of the 2 mounting holes.
- stamped NICKEL SILVER base plates with short legs
- Nickel plated NICKEL SILVER covers
- vintage reproduction mini humbucker bobbins
- sand cast Alnico V magnet bars
- single conductor shielded wire with tinned braided copper shield
- Elektrisola AWG42 enameled copper wire
- coils are wrapped with vintage black paper tape - "flat-back" tape
Hand made by Qpickups.
You can see the DC resistance on the photos, measurements will vary depending on temperature.
Classic mounting screws and springs are included. This is NOT the way original Gibson pickups were mounted.
Gibson® mounted their Les Paul® Deluxe mini-humbucker a bit differently than other pickups.
An aluminum bracket is fastened to the bottom of the pickup cavity and the height screws thread into the bracket.
We do not sell mounting brackets - but we can drill out the mounting ears on the baseplate using a 9/64" drill bit.
This allows the height adjustment screws to turn freely in the ears when mounted on the bracket.
工場出荷状態のカバー無し商品となります。
(新品)
This listing is for 1 pickup - Mini Humbucker.
Pickup cover dimensions are 2.67" x 1.1" x .55" (67.95mm x 28mm x 14mm).
2.94" / 74.6 mm between the centers of the 2 mounting holes.
- stamped NICKEL SILVER base plates with short legs
- Nickel plated NICKEL SILVER covers
- vintage reproduction mini humbucker bobbins
- sand cast Alnico V magnet bars
- single conductor shielded wire with tinned braided copper shield
- Elektrisola AWG42 enameled copper wire
- coils are wrapped with vintage black paper tape - "flat-back" tape
Hand made by Qpickups.
You can see the DC resistance on the photos, measurements will vary depending on temperature.
Classic mounting screws and springs are included. This is NOT the way original Gibson pickups were mounted.
Gibson® mounted their Les Paul® Deluxe mini-humbucker a bit differently than other pickups.
An aluminum bracket is fastened to the bottom of the pickup cavity and the height screws thread into the bracket.
We do not sell mounting brackets - but we can drill out the mounting ears on the baseplate using a 9/64" drill bit.
This allows the height adjustment screws to turn freely in the ears when mounted on the bracket.
工場出荷状態のカバー無し商品となります。
(新品)