Stratocaster Frankenstrat SET Eddie Van Halen EVH Frankenstein Super Strat Q Pickups Vintage PAF
Stratocaster Frankenstrat SET Eddie Van Halen EVH Frankenstein Super Strat Q Pickups Vintage PAF
販売価格: 24,300円(税込)
在庫数
商品詳細
1つ1つのピックアップを手巻きで製造しているピックアップ専門メーカーで、ヨーロッパだけではなく世界でも広く支持されている Q pickups からStratocaster Frankenstrat SET Eddie Van Halen EVH Frankenstein Super Strat Q Pickups Vintage PAFになります。
Stratocaster pickups set - inspired by Mr. Van Halen´s Frankenstrat guitar.
Vintage correct PAF style pickup in the bridge position:
- black BUTYRATE bobbins with 49,2mm spacing. The pickup has to be installed at a slight angle to compensate for the differing string spacings of the Fender tremolo and the Gibson humbucker(49,2mm).
- AWG42 PLAIN ENAMEL WIRE ( HOT / overwound - 8,5kOhm @ 20°C)
- LONG LEGS on the nickel silver base plate. These long legs are too long for your regular strat - you need deeper bridge pickup cavity to install this pickup. Total height of this pickup with LONG LEGS is approx. 27mm. If you want SHORT LEGS and/or F-SPACED bridge pickup send us a message and we will work it out. Each pickup is built to order.
Eddies`s humbucker bridge pickup was mounted directly to the wood/body of the guitar. To install this pickup to the wood you will have to re-drill the mounting holes on the baseplate so they can accept wood screws. We can do that for you - you can leave a note at the checkout page or send us a message.
- rough cast AlNiCo 2 magnet bar
- maple spacer
- machined humbucker bar
- Nickel plated slugs and screws
- vintage style braided output wire
"Eddie installed a red single-coil pickup in the neck position, but it wasn’t connected to the circuit. "
Stratocaster sized neck pickup:
- 13kOhm DC resistance @20°C
- hand wound Elektrisola AWG 43 gauge wire
- red vulcanized fiber bobbin flatwork with brass eyelets
- Alnico 5 polepieces
- cloth covered push-back wire, wax potted(paraffin and bee`s wax).
- the coil is protected with black cloth pickup tape.
送料は全国一律500円になります。
工場出荷状態のカバー無し商品となります。
(新品)
Stratocaster pickups set - inspired by Mr. Van Halen´s Frankenstrat guitar.
Vintage correct PAF style pickup in the bridge position:
- black BUTYRATE bobbins with 49,2mm spacing. The pickup has to be installed at a slight angle to compensate for the differing string spacings of the Fender tremolo and the Gibson humbucker(49,2mm).
- AWG42 PLAIN ENAMEL WIRE ( HOT / overwound - 8,5kOhm @ 20°C)
- LONG LEGS on the nickel silver base plate. These long legs are too long for your regular strat - you need deeper bridge pickup cavity to install this pickup. Total height of this pickup with LONG LEGS is approx. 27mm. If you want SHORT LEGS and/or F-SPACED bridge pickup send us a message and we will work it out. Each pickup is built to order.
Eddies`s humbucker bridge pickup was mounted directly to the wood/body of the guitar. To install this pickup to the wood you will have to re-drill the mounting holes on the baseplate so they can accept wood screws. We can do that for you - you can leave a note at the checkout page or send us a message.
- rough cast AlNiCo 2 magnet bar
- maple spacer
- machined humbucker bar
- Nickel plated slugs and screws
- vintage style braided output wire
"Eddie installed a red single-coil pickup in the neck position, but it wasn’t connected to the circuit. "
Stratocaster sized neck pickup:
- 13kOhm DC resistance @20°C
- hand wound Elektrisola AWG 43 gauge wire
- red vulcanized fiber bobbin flatwork with brass eyelets
- Alnico 5 polepieces
- cloth covered push-back wire, wax potted(paraffin and bee`s wax).
- the coil is protected with black cloth pickup tape.
送料は全国一律500円になります。
工場出荷状態のカバー無し商品となります。
(新品)