Humbucker Pickups PAF RELIC AGED Vintage Correct Fits Gibson SG LP Greco Tokai Epi Q pickups P.A.F.
Humbucker Pickups PAF RELIC AGED Vintage Correct Fits Gibson SG LP Greco Tokai Epi Q pickups P.A.F.
販売価格: 39,100円(税込)
申し訳ございません、こちらの商品お取り寄せに3週間ほどいただきます。よろしくお願いします。
商品詳細
1つ1つのピックアップを手巻きで製造しているピックアップ専門メーカーで、ヨーロッパだけではなく世界でも広く支持されている Q pickups からHumbucker Pickups PAF RELIC AGED Vintage Correct Fits Gibson SG LP Greco Tokai Epi Q pickups P.A.F.になります。
Bridge and neck pickup, P.A.F. specs, cream butyrate bobbins with aged / relic`d NON PLATED nickel silver covers.
Built to deliver - hotter wound bridge @ 7,9kOhm and low wound neck @7,3kOhm will produce all of those great humbucker tones without getting muddy or microphonic.
Wax potted.
- wound with plain enamel Elektrisola AWG 42 wire
- stamped nickel silver baseplate with 49.2 mm - 1 15/16" pole spacing for both pickups, long legs, threaded pole screw holes enable contact between the pole screws and baseplates like in the original PAF pickups
- vintage reproduction cream butyrate bobbins with offset square inside hole, black lead wires, mismatched DC resistance
- rough cast Alnico 4 magnet bars
- nickel plated steel screws and slugs
- maple spacer
- machined humbucker keeper bar
- single conductor shielded wire with tinned braided copper shield
- brass phillips bobbin mounting screws
- coils and pickups are wraped with 50`s style black paper "flat-back" tape, 1/4" wide
工場出荷状態のカバー無し商品となります。
(新品)
Bridge and neck pickup, P.A.F. specs, cream butyrate bobbins with aged / relic`d NON PLATED nickel silver covers.
Built to deliver - hotter wound bridge @ 7,9kOhm and low wound neck @7,3kOhm will produce all of those great humbucker tones without getting muddy or microphonic.
Wax potted.
- wound with plain enamel Elektrisola AWG 42 wire
- stamped nickel silver baseplate with 49.2 mm - 1 15/16" pole spacing for both pickups, long legs, threaded pole screw holes enable contact between the pole screws and baseplates like in the original PAF pickups
- vintage reproduction cream butyrate bobbins with offset square inside hole, black lead wires, mismatched DC resistance
- rough cast Alnico 4 magnet bars
- nickel plated steel screws and slugs
- maple spacer
- machined humbucker keeper bar
- single conductor shielded wire with tinned braided copper shield
- brass phillips bobbin mounting screws
- coils and pickups are wraped with 50`s style black paper "flat-back" tape, 1/4" wide
工場出荷状態のカバー無し商品となります。
(新品)