Q pickups Telecaster Monster SET 18k Bridge 14k Neck A5 HOT Tele Hand Wound Custom Fits Fender
Q pickups Telecaster Monster SET 18k Bridge 14k Neck A5 HOT Tele Hand Wound Custom Fits Fender
販売価格: 13,800円(税込)
在庫数
商品詳細
1つ1つのピックアップを手巻きで製造しているピックアップ専門メーカーで、ヨーロッパだけではなく世界でも広く支持されている Q pickups からQ pickups Telecaster Monster SET 18k Bridge 14k Neck A5 HOT Tele Hand Wound Custom Fits Fenderになります。
CustomTelecaster set - RED top / RED bottom flatwork, A5 MAGNETS
- BRIDGE PICKUP 18kOhm
- red vulcanized fiberboard flatwork
- sand cast Alnico 5 magnets
- the coil is wrapped with BLACK CLOTH PICKUP TAPE
- wax potted in paraffin and bee`s wax
- 6-32 x 5/8" round head mounting screws - cloth covered push back white and black output wires (black is ground)
- polarity is SOUTH UP / CW winding direction
- NECK PICKUP 14kOhm - red flatwork
- wax potted
- vintage push back black and yellow cloth covered output wire - the coil is wrapped with BLACK CLOTH PICKUP TAPE
- polarity is north UP / CCW winding direction R.W.R.P - HUM CANCELING when both pickups are active.
IMPORTANT!
Tele neck pickups can be mounted with WOOD or PICKGUARD screws. Please let us know if you need the pickguard or wood mounting screws with this pickup. You can send us a message or leave a note on the checkout page.
#3 x 1" Round Head Wood Screws
Wood mounting screws are screwed to the body/ wood - under the pickguard - and these require a larger hole in the pickup - so we will re-drill the mounting holes in the pickup to fit the wood screws.
#4 - 40UNC Phillips Pan Head Pickguard Screws
Pickguard screws are used for mounting the pickup on the pickguard - this way the pickup height can be adjusted without removing the pickguard.
送料は全国一律500円になります。
工場出荷状態のカバー無し商品となります。
(新品)
CustomTelecaster set - RED top / RED bottom flatwork, A5 MAGNETS
- BRIDGE PICKUP 18kOhm
- red vulcanized fiberboard flatwork
- sand cast Alnico 5 magnets
- the coil is wrapped with BLACK CLOTH PICKUP TAPE
- wax potted in paraffin and bee`s wax
- 6-32 x 5/8" round head mounting screws - cloth covered push back white and black output wires (black is ground)
- polarity is SOUTH UP / CW winding direction
- NECK PICKUP 14kOhm - red flatwork
- wax potted
- vintage push back black and yellow cloth covered output wire - the coil is wrapped with BLACK CLOTH PICKUP TAPE
- polarity is north UP / CCW winding direction R.W.R.P - HUM CANCELING when both pickups are active.
IMPORTANT!
Tele neck pickups can be mounted with WOOD or PICKGUARD screws. Please let us know if you need the pickguard or wood mounting screws with this pickup. You can send us a message or leave a note on the checkout page.
#3 x 1" Round Head Wood Screws
Wood mounting screws are screwed to the body/ wood - under the pickguard - and these require a larger hole in the pickup - so we will re-drill the mounting holes in the pickup to fit the wood screws.
#4 - 40UNC Phillips Pan Head Pickguard Screws
Pickguard screws are used for mounting the pickup on the pickguard - this way the pickup height can be adjusted without removing the pickguard.
送料は全国一律500円になります。
工場出荷状態のカバー無し商品となります。
(新品)